![Raspberry Pi Camera Scheduler [Discontinued]](https://img.piphonic.shop/images/product/raspberry-pi-camera-scheduler-1.jpg)
Original: $17.56
-70%$17.56
$5.27The Story
Control two Raspberry Pi Camera Modules with a single Raspberry Pi 4/3/2 with this clever cable from Waveshare!
Important note: This cable requires careful soldering to enable GPIO switching of the camera modules. Please *read the guide* before purchasing!
Not compatible with Raspberry Pi 5 or ZeroĀ (because they both use smaller CSI camera connectors).
Features
- Time-share scheduling function: allows the Raspberry Pi to connect two cameras at the same time, and select the active one manually or automatically (by GPIO)
- Dimensions: 76mm x 26mm
- Compatible with Raspberry Pi Zero/2/3/4
- Requires soldering!
Camera Compatibility
- Two 8MP IMX219 cameras (official camera modules) OR two 5MP OV5647 cameras
- Does not work with a mix of IMX219 and OV5647 modules - modules must be of the same type!
-
Not yet confirmed as compatible with the Raspberry Pi Camera Module 3
Included
- 1x Camera Scheduler
- 2x Jumper wire 2.54 Pitch
- 1x FFC 22-pin 160mm cable (opposite side contact)
Resources
- Product Wiki: https://www.waveshare.com/camera-scheduler.htm
![Raspberry Pi Camera Scheduler [Discontinued] - Image 2](https://img.piphonic.shop/images/product/raspberry-pi-camera-scheduler-2.jpg)
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
![Raspberry Pi Camera Scheduler [Discontinued] - Image 3](https://img.piphonic.shop/images/product/raspberry-pi-camera-scheduler-3.jpg)
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Control two Raspberry Pi Camera Modules with a single Raspberry Pi 4/3/2 with this clever cable from Waveshare!
Important note: This cable requires careful soldering to enable GPIO switching of the camera modules. Please *read the guide* before purchasing!
Not compatible with Raspberry Pi 5 or ZeroĀ (because they both use smaller CSI camera connectors).
Features
- Time-share scheduling function: allows the Raspberry Pi to connect two cameras at the same time, and select the active one manually or automatically (by GPIO)
- Dimensions: 76mm x 26mm
- Compatible with Raspberry Pi Zero/2/3/4
- Requires soldering!
Camera Compatibility
- Two 8MP IMX219 cameras (official camera modules) OR two 5MP OV5647 cameras
- Does not work with a mix of IMX219 and OV5647 modules - modules must be of the same type!
-
Not yet confirmed as compatible with the Raspberry Pi Camera Module 3
Included
- 1x Camera Scheduler
- 2x Jumper wire 2.54 Pitch
- 1x FFC 22-pin 160mm cable (opposite side contact)
Resources
- Product Wiki: https://www.waveshare.com/camera-scheduler.htm
